Smart and sustainable building appraisal

Main Article Content

Mir Sayed Shah Danish
Tomonobu Senjyu
Masooma Nazari
Hameedullah Zaheb
Thabit Salim Nassor
Sayed Mir Shah Danish
Hedayatullah Karimy


In general terms, energy efficiency and conservation appraisal aspire to deliver an insatiable energy demand with less energy within the most significant amount of conservation and environmental benefits at the lowest possible price. Sustainable planning and design rely on a series of multi-disciplines: technical, technological, social, political, environmental, ecological, economic, institutional, and global restrictions that abstruse viable decision-making. Recent reports indicate that the residential building sector consumes 40% of the total energy and emits 30% of greenhouse gas (GHGs) worldwide. Thus accordingly, energy consumption in buildings is estimated at one-third of total primary energy resources. Therefore, proper modeling and optimization of a sustainable building in terms of energy efficiency and saving become a matter of focus. This paper explores an emerging picture of influential factors in the context of hands-on roadmap for energy-efficient and smart city planners, practitioners, scholars, and researchers. This study reviews the main points and proposes a framework in detail in the upcoming studies. Meanwhile, another objective of this paper was to introduce the most crucial indicators of energy-efficient building planning, design, and optimization to draw an exhaustive roadmap in compliance with resiliency, sustainability, and efficiency criteria throughout the lifecycle of a sustainable building.

Article Details

How to Cite
Danish, M. S. S., Senjyu, T. ., Nazari , M. ., Zaheb, H. ., Nassor, T. S. ., Danish , S. M. S. . and Karimy, H. . (2021) “Smart and sustainable building appraisal”, Journal of Sustainable Energy Revolution. Okinawa, Japan, 2(1), pp. 1-5. doi: 10.37357/1068/jser.2.1.01.
Energy Resources and Technologies
Author Biography

Mir Sayed Shah Danish, University of the Ryukyus



Danish MSS, Senjyu T, Ibrahimi AM, Ahmadi M, Howlader AM (2019) “A managed framework for energy-efficient building” Journal of Building Engineering (vol. 21, pp. 120–128)

Brenna M, Falvo MC, Foiadelli F, Martirano L, Poli D (2012) “Sustainable Energy Microsystem (SEM): preliminary energy analysis” 2012 IEEE PES Innovative Smart Grid Technologies (ISGT) Washington, DC, USA, IEEE - pp. 1–6. ( Accessed: 3 February 2019

Bourdeau M, Zhai X qiang, Nefzaoui E, Guo X, Chatellier P (2019) “Modeling and forecasting building energy consumption: A review of data-driven techniques” Sustainable Cities and Society (vol. 48, pp. 101533)

Nematchoua MK, Yvon A, Roy SEJ, Ralijaona CG, Mamiharijaona R, et al. (2019) “A review on energy consumption in the residential and commercial buildings located in tropical regions of Indian Ocean: A case of Madagascar island” Journal of Energy Storage (vol. 24, pp. 100748)

Kräuchi P, Dahinden C, Jurt D, Wouters V, Menti U-P, et al. (2017) “Electricity consumption of building automation” Energy Procedia (vol. 122, pp. 295–300)

Kostyk T, Andrews CJ, Herkert J, Miller C (2011) “Energy and society: challenges ahead” 2011 IEEE International Symposium on Technology and Society (ISTAS) pp. 1–1.

Kundur P (2004) “Sustainable electric power systems in the 21st century: requirements, challenges and the role of new technologies” IEEE Power Engineering Society General Meeting, 2004. Denver, CO, USA, IEEE, vol. 2 - pp. 2298–2299. ( Accessed: 3 February 2019

Danish MSS, Senjyu T, Danish SMS, Sabory NR, K N, et al. (2019) “A Recap of Voltage Stability Indices in the Past Three Decades” Energies (vol. 12, no. 8, pp. 1544)

Danish MSS, Yona A, Senjyu T (2015) “A Review of Voltage Stability Assessment Techniques with an Improved Voltage Stability Indicator” International Journal of Emerging Electric Power Systems (vol. 16, no. 2, pp. 107–115)

Danish MSS, Senjyu T, Zaheb H, Sabory NR, Ibrahimi AM, et al. (2019) “A novel transdisciplinary paradigm for municipal solid waste to energy” Journal of Cleaner Production (vol. 233, pp. 880–892)

O’Neill-Carrillo E, Irizarry-Rivera AA, Colucci-Rios JA, Perez-Lugo M, Ortiz-Garcia C (2008) “Sustainable Energy: Balancing the Economic, Environmental and Social Dimensions of Energy” 2008 IEEE Energy 2030 Conference Atlanta, GA, USA, IEEE - pp. 1–7. ( Accessed: 21 July 2019

Putting energy efficiency first: consuming better, getting cleaner (2019) European Commission ( Accessed: 21 July 2019

Akadiri PO, Chinyio EA, Olomolaiye PO (2012) “Design of A Sustainable Building: A Conceptual Framework for Implementing Sustainability in the Building Sector” Buildings (vol. 2, no. 2, pp. 126–152)

Dahunsi FM (2013) “Conceptual framework for sustainable energy development in Africa” 2013 IEEE International Conference on Emerging & Sustainable Technologies for Power & ICT in a Developing Society (NIGERCON) Owerri, Nigeria, IEEE - pp. 238–241. ( Accessed: 21 July 2019

Gutiérrez Trashorras AJ, González-Caballín Sánchez JM, Álvarez Álvarez E, Paredes Sánchez JP (2015) “Certification of Energy Efficiency in New Buildings: A Comparison Among the Different Climatic Zones of Spain” IEEE Transactions on Industry Applications (vol. 51, no. 4, pp. 2726–2731)

Zheng S, Lam C-M, Hsu S-C, Ren J (2018) “Evaluating efficiency of energy conservation measures in energy service companies in China” Energy Policy (vol. 122, pp. 580–591)

Farrow K, Grolleau G, Mzoughi N (2018) “Less is more in energy conservation and efficiency messaging” Energy Policy (vol. 122, pp. 1–6)

Qian D, Li Y, Niu F, O’Neill Z (2019) “Nationwide savings analysis of energy conservation measures in buildings” Energy Conversion and Management (vol. 188, pp. 1–18)

Fedorova E, Pongrácz E (2019) “Cumulative social effect assessment framework to evaluate the accumulation of social sustainability benefits of regional bioenergy value chains” Renewable Energy (vol. 131, pp. 1073–1088)

Danish MSS, Senjyu T, Sabory NR, Danish SMS, Ludin GA, et al. (2017) “Afghanistan’s aspirations for energy independence: Water resources and hydropower energy” Renewable Energy (vol. 113, pp. 1276–1287)

Danish MSS, Matayoshi H, Howlader HOR, Chakraborty S, Mandal P, et al. (2019) “Microgrid Planning and Design: Resilience to Sustainability” Bangkok, Thailand, IEEE -

Danish MSS, Sabory NR, Ershad AM, Danish SMS, Yona A, et al. (2017) “Sustainable Architecture and Urban Planning trough Exploitation of Renewable Energy” International Journal of Sustainable and Green Energy (vol. 6, no. 3, pp. 1–7)

Kim J-J, Rigdon B (1998) “Sustainable Architecture Module: Introduction to Sustainable Design” National Pollution Prevention Center for Higher Education (pp. 28)

Danish MSS, Senjyu T, Zaheb H, Sabory NR, Ibrahimi AM, et al. (2019) “A Novel Transdisciplinary Paradigm for Solid Waste to Sustainable Energy” Journal of Cleaner Production (vol. (under review), )

Danish MSS, Zaheb H, Sabory NR, Karimy H, Faiq AB, et al. (2019) “The Road Ahead for Municipal Solid Waste Management in the 21st Century: A Novel-standardized Simulated Paradigm” The 3rd International Conference on Energy and Environmental Science 2019 (ICEES 2019) Seoul, South Korea, IOP Conference Series: Earth and Environmental Science (EES), vol. (in press) -

Jensen PA, Maslesa E, Berg JB, Thuesen C (2018) “10 questions concerning sustainable building renovation” Building and Environment (vol. 143, pp. 130–137)

Shealy T (2016) “Do Sustainable Buildings Inspire More Sustainable Buildings?” Procedia Engineering (vol. 145, pp. 412–419)

Oduyemi O, Okoroh M (2016) “Building performance modelling for sustainable building design” International Journal of Sustainable Built Environment (vol. 5, no. 2, pp. 461–469)

Díaz López C, Carpio M, Martín-Morales M, Zamorano M (2019) “A comparative analysis of sustainable building assessment methods” Sustainable Cities and Society (vol. 49, pp. 101611)

Danish MSS, Yona A, Senjyu T (2014) “Pre-design and life cycle cost analysis of a hybrid power system for rural and remote communities in Afghanistan” The Journal of Engineering-IET (vol. 2014, no. 8, pp. 438–444)

Azhar S, Carlton WA, Olsen D, Ahmad I (2011) “Building information modeling for sustainable design and LEED® rating analysis” Automation in Construction (vol. 20, no. 2, pp. 217–224)

Humbert S, Abeck H, Bali N, Horvath A (n.d.) “Leadership in Energy and Environmental Design (LEED) - A critical evaluation by LCA and recommendations for improvement” (pp. 18)

Danish MSS, Senjyu T (2019) “Green Building Efficiency and Sustainability Indicators” Green Building Management and Smart Automation , 1st ed. IGI Global, vol. (In press) - pp. 1–20.

Popovic T, Barbosa-Póvoa A, Kraslawski A, Carvalho A (2018) “Quantitative indicators for social sustainability assessment of supply chains” Journal of Cleaner Production (vol. 180, pp. 748–768)

Tripathi V (2016) “A literature review of quantitative indicators to measure the quality of labor and delivery care” International Journal of Gynecology & Obstetrics (vol. 132, no. 2, pp. 139–145)

Most read articles by the same author(s)

<< < 1 2